23 février 2007
Fibre optique

Amplificateur monomode Er3+ -Yb3+ haute puissance à double gainage 10 W sans ASE

Publication : Proceedings Volume 6453/ 23 February 2007 / Fiber Lasers IV: Technology, Systems, and Applications – SPIE Photonics West 2007

Auteurs : Bertrand Morasse, Søren Agger, Stéphane Chatigny, Éric Gagnon, Jean-Philippe de Sandro, Christian Poulsen

 

(Texte original anglais seulement)

10 W ASE-free single mode high power double cladding Er 3+ -Yb 3+ amplifier

We designed a high output power double cladding erbium-ytterbium fibre amplifier that showed no amplified spontaneous emission (ASE) at 1.0 µm using a quasi singlemode fibre. The reduction of the amplified stimulated emission (ASE) at 1.0 µm was found to be the combination of fibre design and temperature effect in the core. A 10W output double cladding Er-Yb amplifier with a core/cladding fibre diameter of 10/125 µm was realized with a seed signal of 1.4 W at 1563 nm and with counter-propagating pump power of 35 W at 976 nm without any significant ASE generation at 1.0 µm. The fibre also exhibits singlemode behaviour with M 2 <1.1 and a high slope efficiency of 30%. The fibre was designed to minimize ASE at 1.0 µm by heavily doping the fibre and using the appropriate ratio between Yb 3+ and Er 3+ ions. By incorporating into our model the core temperature increase coming from the quantum defect of the Er-Yb system, we can also predict a raise in the absorption cross-section of the ytterbium ions around 1060 nm yielding to an increase of the 1 µm ASE threshold from 14 W to 35 W pump power, which allowed us to reach a 10 W output power at 1563 nm instead of 5 W normally predicted by the theory. These results show potential power scaling of the output power or double cladding erbium ytterbium amplifier using quasi singlemode core erbium ytterbium fibre avoiding the need of large core dimension that degrades the beam quality.

Partagez